While building a new home or constructing a roof for an existing one, the materials that are chosen will have a significant impact on how the home feels, looks, and costs, not just for the immediate construction expenditures, but also in the long-term costs like for maintenance and energy.
There are two types of roofing, metal roofing and asphalt roofing. Metal roofing is often more expensive to install (and much more expensive in some circumstances), but they also require much less maintenance. While Shingle roof construction is still the most frequently used roofing material and is cost effective.
What is Asphalt Roofing?
Asphalt Shingles are normally sold in stacks, sheets, or rolls and are mostly similar in composition and appearance. It has a ceramic granular texture on its upper surface and a smooth asphalt roofing layer over a fibreglass foundation. Shingles are usually fastened to wooden-framed roof structures and piled and staggered in an upward direction from the very lowest point on a sloping roof.
Asphalt Roofing – Advantages
- It’s inexpensive to create, cheap to buy, and cheap to install.
- Easily accessible, readily available, comparably constructed, and reasonably priced
- Simple and relatively long-lasting
Asphalt Roofings – Disadvantages
- Snow retention is poor.
- Extreme weather can cause damage.
- Not very energy efficient .
What is Metal Roofing?
Metal roofing is available in big flat sheets that are folded lengthwise in a variety of pattern categories such as flat seam metal roofing and corrugated metal roofing. Flat seam metal roofing is expensive to manufacture and install but the interlocking seam design is one of the finest available.
Metal Roofing – Advantages
- Durability— Metal roofs typically outlast counterparts of any other construction material.
- Easy to care for
- Trendy
- Potential energy savings
Metal Roofing – Disadvantages
- Installation costs more.
- Installation is more difficult.
- Heavier—could cause a problem with the load-bearing capability of the building.
What is the Best Roofing Material?
Maintenance and Care
Metal Roofing – Caring for metal roof is mostly less difficult than caring for an asphalt roof. But this relies on the angle or slope of the roof and whether the job is done by a professional roofing expert or by a novice.
Asphalt shingles – Asphalt shingles are inexpensive and simple to maintain, but they require more upkeep than a metal roof. Shingles can slip, crumble, and eventually fall off due to exposure to the outdoors.
Longevity
Metal Roofing – Around 40 to 70 Years
Asphalt shingles – Around 40 to 50 years
Cost
Metal Roofing – Between $8 and $16 per square foot.
Asphalt shingles – Between $2 and $6 per square foot.
Installation
Metal Roofing – Because of the weight and bulk of metal roofing panels, installation can be difficult and time consuming.
Asphalt shingles – They’re easy to install and can be done by builders, carpenter as well as yourself.
Conclusion
In case you have a good budget for your home roofing, the functional and cosmetic benefits of metal roofing are likely to be worthwhile. Asphalt roofing is more widespread, therefore it is rather easy to find roofing contractors to repair it. Both the roofing materials are effective and have been for decades.
